Nurseryworks Storytime Rocker - Slate/Light Legs

Q1: Nurseryworks' finishes and wood?

A: Nurseryworks furniture is handcrafted from woods finished with non-toxic and certified-safe lacquer and veneers. A child can not be harmed by these finishes. Furniture may be affected by a teething child. Replacement parts, touch-up paint, and wood stain pens are available for sale from Nurseryworks. Nurseryworks products are handcrafted and made of woods. Wood is a natural material, which may bend and cause a variation in the alignment of the drawers. Should this occur, Nurseryworks recommends attaching felt tabs or rubber pieces underneath the drawers to ensure that the drawers align.

Q2: Manufactured in?

A: Taiwan

Q3: How should Nurseryworks furniture be cared for?

A: A cotton cloth and a nontoxic cleanser will handle most needs. Nurseryworks fabrics are stain and water resistant; blotting a stain immediately with water will remove most spills. If using a fabric cleanser, an inconspicuous spot should be tested to ensure that it does not discolor the fabric. Periodic polishing or oiling of legs that have a stain finish will maintain the rich tones.

Q4: What are Nurseryworks products made of?

A: Nurseryworks furniture is made of six types of wood - ash, bent plywood, natural catalpa, Paulownia, pine, and zebra - with low-VOC lacquer and/or stained. Paulownia is a plantation wood that is harvested every 8 to10 years, thereby meeting standards for sustainability. A small amount of MDF is used to produce the Nurseryworks unique carving options.

Q5: What is required to assemble Nurseryworks furniture?

A: All Nurseryworks furniture requires some assembly, and detailed instructions are included. Required tools include a screwdriver, pliers, and possibly a wrench (for extra tightening). Assembly is simple and can be performed in less than one hour per piece.